FAST DELIVERY from £1.75
Cart 0

WiFi Dongle + OTG RJ45 HUB + HDMI Adaptor + 40 pin Headers Raspberry Pi Zero

£9.80
WiFi Dongle + OTG RJ45 HUB + HDMI Adaptor + 40 pin Headers for Raspberry Pi Zero
 
This Pi Zero Starter Kit is almost everything you need to get going with your Pi Zero and make it a complete.
The kit comes with super handy micro USB HUB which allows you to plug in Keyboard, Mouse, Wifi Dongle etc and also connect to the internet via the RJ45 socket or use the Wifi Dingle. The micro HDMI adapter allows you connect the Pi Zero to your HDMI TV.  There also also a set of 2 x 20 and 2x2 pins male headers included in the kit for the GPIOs and the reset/TV switch, so you can explore with the GPIO's on the Pi Zero. 
 
The kit includes:
 
USB Wireless WiFi  802.11n LAN USB Adapter Dongle 150M for Raspberry Pi
Description:
150 Mbps wireless transmission rate                                                                            
Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
Stronger signal gain                                                                            
Maximum close to the wired network                                                                            
Lower delay on game and moive                                                                            
Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802.1 x security authentication standards                                                                            
A key encryption to supports WPS                                                                             
High-Speed USB 2.0                                                                            
Supports soft AP modes                                                                            
Transmission Distance: Indoor up to 100m, outdoor up to 300m (it is limited in an environment)Operating Systems: WIN 2000/ XP/ VISTA/ WIN 7/ MAC.OS/ LINUX
Transmission Distance: Indoor up to 100m, outdoor up to 300m (it is limited in an environment)Operating Systems: WIN 2000/ XP/ VISTA/ WIN 7/ MAC.OS/ LINUX
 
 
 
Micro USB RJ45HUB - Lets you plug in normal USB device such as WiFi dongle, keyboard, mouse, etc into the Pi Zero.
 
Mini HDMI to HDMI Adapter - Will let you convert the little port on the Zero to a standard sized HDMI jack. You can get 1080P HDMI video + audio out of this little computer!
 
2 x 20 Male header pins- Solder this in to plug in Pi HATs, GPIO cables, etc as you would into a normal Pi. 
2 x 2pin headers for the reset/TV switch
 
 
Micro USB HUB
1.Supports Raspberry Pi Zero
2.Chip: AX88772
3.Support system:Windows 98SE/ME/2000/XP, android, Macintosh OS 9.0 or upper version.
4.Connection Speed: 10M/100Mbps.
5.Operating voltage: 4.2-5.5V.
6.Power: 1W.
7.Operating Frequency: 48MHz/125MHz.
8.Operating temperature: -25 Centigrade ~ +70 Centigrade.
9.Storage temperature: -40 ~ 85 Centigrade
10.Relative Humidity: 10% ~ 80% (non-condensing).
11.Operating Current: 180MA/5V.
 
Features and Advantages:
1. Classical design, easy to use.
2. Compliant with Tablet computers,ajust to MAC os system,no driver required with Tablet computer.
3. Broadband network with USB interface data transmission, apply to the desktop and laptop computers.
4. Support hot swaps. 5. neutral English clamshell packaging carton.
6. This device complies with USB Specifications 2.0 and 1.1,and uses a USB type A connector to connecter to the USB host device drows power from the USB host bus, therefore no external power supply is required..
7. Support full-duplex data flow control (IEEE802.3X).
8. Support Protocol: IEEE 802.3u standard.
9. Support Performance USBV1.1 standard,Support full-duplex and half-duplex transmission speed for 10 and 100 Mbps operation.
10. Interface: USB,RJ45. 12.1. Integrated Fast Ethernet MAC, Physical Chip and transceiver in one chip.
11. Supports 10 Mb/s and 100Mb/s N-Way Auto-negotiation operation..
12. Support all USB standard command..
13. Supports Suspend/Resume detection logic.
14. 18K bytes SRAM built in. (2K bytes for Tx buffer, and 16K bytes for Rx buffer).
15. Compliant with PCI revision 2.2.
16. Supports ACPI, PCI power management.
17. Compliant with PC99 standard.
18. With 3 port USB2.0 HUB, convenient design.
 
 
We also sell other Raspberry Pi Zero accessories.
 
Kit contents:
1 x Wifi Dongle
1 x Micro USB Ethernet LAN RJ45 Hub
1 x mini-HDMI to HDMI adapter
1 x 2x20 pin male GPIO header pins
1 x 2x2 pin for reset/TV switch
Raspberry Pi is a Trademark of the Raspberry Pi Foundation
 
Product ID: EP00345


More from this collection