Electronic Balance Weighing Load Cell Sensor 5Kg for Raspberry Pi Arduino
£4.50
Electronic Balance Weighing Load Cell Sensor 5Kg for Raspberry Pi Arduino
Product Description
This straight bar load cell (also called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
This straight bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 5kg. These load cells have four strain gauges that are hooked up in a wheatstone bridge formation. The color code on the wiring is as follows: red = E+, green = O+, black = E-, and white = O-. Additionally, these load cells offer an IP66 protection rating and feature two M4 and two M5 sized thru holes for mounting purposes.
Applications
Strain measurement
Digital and Analog Electronic Weighing scales
Weight Balancing Machines
Technical Specifications
Model: YZC-133
Material: Aluminum
Dimensions: 75×12.7×12.7mm/2.95 x 0.51 x 0.51″(L x W x H)
Range: 5kg
Rated output 1.0 ± 0.1mV / V
Nonlinear ± 0.03% F.S
Hysteresis 0.03% F.S
Repeatability 0.03% F.S
Creep (5 minutes) 0.05% F.S
Zero Balance ± 0.1 mV / V
Input impedance 1066 ± 10% Ω
Output Impedance 1000 ± 10% Ω
Insulation resistance: 2000 MΩ
Operating temperature range -20 ~ 65°C
Weight:28g
Wire length: 200mm ~ 220mm
Pinouts
Red : E+
Black: E-
White: S+
Green: S-
Package Content:
1 x Weight Sensor 5KG
Raspberry Pi is a Trademark of the Raspberry Pi Foundation.
Product ID: EP00421
Product Description
This straight bar load cell (also called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar. With this gauge you will be able to tell just how heavy an object is, if an object’s weight changes over time, or if you simply need to sense the presence of an object by measuring strain or load applied to a surface.
This straight bar load cell is made from an aluminum-alloy and is capable of reading a capacity of 5kg. These load cells have four strain gauges that are hooked up in a wheatstone bridge formation. The color code on the wiring is as follows: red = E+, green = O+, black = E-, and white = O-. Additionally, these load cells offer an IP66 protection rating and feature two M4 and two M5 sized thru holes for mounting purposes.
Applications
Strain measurement
Digital and Analog Electronic Weighing scales
Weight Balancing Machines
Technical Specifications
Model: YZC-133
Material: Aluminum
Dimensions: 75×12.7×12.7mm/2.95 x 0.51 x 0.51″(L x W x H)
Range: 5kg
Rated output 1.0 ± 0.1mV / V
Nonlinear ± 0.03% F.S
Hysteresis 0.03% F.S
Repeatability 0.03% F.S
Creep (5 minutes) 0.05% F.S
Zero Balance ± 0.1 mV / V
Input impedance 1066 ± 10% Ω
Output Impedance 1000 ± 10% Ω
Insulation resistance: 2000 MΩ
Operating temperature range -20 ~ 65°C
Weight:28g
Wire length: 200mm ~ 220mm
Pinouts
Red : E+
Black: E-
White: S+
Green: S-
Package Content:
1 x Weight Sensor 5KG
Raspberry Pi is a Trademark of the Raspberry Pi Foundation.
Product ID: EP00421