INA3221 Triple Channel Shunt Current Power Supply Voltage Monitor Sensor Board
£4.90
INA3221 Triple Channel Shunt Current Power Supply Voltage Monitor Sensor Board
The INA3221 or rather one of the boards based around it, allows for a single power input and up to 3 power outputs –each monitoring voltage and current and all done via I2c. You can (almost) think of this as a triple INA219 – the bidirectional current power monitor.
3 Channel Current Sensor INA3221 I2C (High Side DC Current) / Measure Module for Current
With this Breakout / Sensor you solve all your power monitoring problems! Thanks to the INA3221 IC, you can measure voltage and current and pass it on to a microprocessor via I2C or SMBUS.
The INA3221 senses current on buses that can vary from 0 V to 26 V. The device is powered from a single 2.7-V to 5.5-V supply, and draws 350 µA (typ) of supply current. The INA3221 is specified over the operating temperature range of –40°C to +125°C. The I2C- and SMBUS-compatible interface features four programmable addresses.
Features:
Senses Bus Voltages From 0 V to 26 V
Reports Shunt and Bus Voltage
High Accuracy:
Offset Voltage: ±80 µV (max)
Gain Error: 0.25% (max)
Configurable Averaging Options
Four Programmable Addresses
Programmable Alert and Warning Outputs
Power-Supply Operation: 2.7 V to 5.5 V
Data Sheet INA3221
https://hobby-elektronik.ch/media/products/0126826001518632990.pdf
Package content:
1 x INA3221 Sensor Module
Raspberry Pi is a Trademark of the Raspberry Pi Foundation.
Product ID: EP00633
The INA3221 or rather one of the boards based around it, allows for a single power input and up to 3 power outputs –each monitoring voltage and current and all done via I2c. You can (almost) think of this as a triple INA219 – the bidirectional current power monitor.
3 Channel Current Sensor INA3221 I2C (High Side DC Current) / Measure Module for Current
With this Breakout / Sensor you solve all your power monitoring problems! Thanks to the INA3221 IC, you can measure voltage and current and pass it on to a microprocessor via I2C or SMBUS.
The INA3221 senses current on buses that can vary from 0 V to 26 V. The device is powered from a single 2.7-V to 5.5-V supply, and draws 350 µA (typ) of supply current. The INA3221 is specified over the operating temperature range of –40°C to +125°C. The I2C- and SMBUS-compatible interface features four programmable addresses.
Features:
Senses Bus Voltages From 0 V to 26 V
Reports Shunt and Bus Voltage
High Accuracy:
Offset Voltage: ±80 µV (max)
Gain Error: 0.25% (max)
Configurable Averaging Options
Four Programmable Addresses
Programmable Alert and Warning Outputs
Power-Supply Operation: 2.7 V to 5.5 V
Data Sheet INA3221
https://hobby-elektronik.ch/media/products/0126826001518632990.pdf
Package content:
1 x INA3221 Sensor Module
Raspberry Pi is a Trademark of the Raspberry Pi Foundation.
Product ID: EP00633