PCF8591 AD/DA Converter Module Analogue to Digital to Analogue Conversion NEW
£3.25
PCF8591 AD/DA Converter Module Analogue to Digital to Analogue Conversion for Raspberry Pi Arduino NEW
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
PCF8591 IC Features
Single power supply
PCF8591 operating voltage range of 2.5V-6V
Low standby current
Via I2C bus serial input / output
PCF8591 by 3 hardware address pins addressing
PCF8591 I2C bus speed sampling rate decided
4 analog inputs programmable single-ended or differential input
Automatic incremental channel selection
PCF8591 analog voltage range from VSS to VDD
PCF8591 built-in track-and-hold circuit
8-bit successive approximation A / D converter
1 analog output DAC gain
Module Features
Module chip using PCF8951
Module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
The module integrated photoresistor by AD collection precise value of the ambient light intensity
Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
Modules with power indicator (for the module power supply indicator lights)
Modules with DA output indicator, when the module DA output interface voltage reaches a certain value, will be lit panel the DA output indicator, the higher the voltage, the more obvious indicator brightness;
Module PCB size: 3.6cm * 2.3cm
Standard double panel, thickness 1.6mm, nice layout, surrounded by a through-hole, aperture: 3mm, convenient fixed
Module interface specification
The module on the left and right, respectively, to expand outside the 2-way pin header, respectively, as follows:
The left
AOUT chip DA output interface
AINO chip analog input interface 0
AIN1 chip analog input interface 1
AIN2 chip analog input interface 2
AIN3 chip analog input interface 3
The right
SCL – IIC clock interface connected to microcontroller IO port
SDA – IIC digital interface connected to microcontroller IO port
GND – connected to ground
VCC – connected to 3.3v-5v
Four red jumper-cap instruction
P4 – connected to P4 shorting cap, select thermistor access circuit
P5 – connect P5 shorting cap, select photoresistor access circuit
P6 – connected to P6 shorting cap, select 0-5V adjustable voltage access circuit
Package Content:
1 x PCF8591 Module
4 x 20cm cables
UK Seller, quick dispatch. 1ST CLASS POST.
Please see my other listings for Raspberry Pi and Arduino related products.
Product ID: EP015
The PCF8591 is a monolithically integrated, and a separate power supply, low-power, 8-bit CMOS data acquisition devices. The PCF8591 has the four analog inputs, one analog output and a serial I2C bus interface. PCF8591 three address pins A0, A1 and A2 can be used in hardware address programmed 8 PCF8591 device allows access to the same I2C bus, without the need for additional hardware. On the PCF8591 device input and output of the address, control and data signals are transmitted in serial fashion via the two-wire bidirectional I2C bus.
PCF8591 IC Features
Single power supply
PCF8591 operating voltage range of 2.5V-6V
Low standby current
Via I2C bus serial input / output
PCF8591 by 3 hardware address pins addressing
PCF8591 I2C bus speed sampling rate decided
4 analog inputs programmable single-ended or differential input
Automatic incremental channel selection
PCF8591 analog voltage range from VSS to VDD
PCF8591 built-in track-and-hold circuit
8-bit successive approximation A / D converter
1 analog output DAC gain
Module Features
Module chip using PCF8951
Module supports external voltage input of the 4-way acquisition (voltage input range of 0-5v)
The module integrated photoresistor by AD collection precise value of the ambient light intensity
Module integrated thermistor by the precise value of the ambient temperature of the AD acquisition
Module integrated 1 channel 0-5V voltage input acquisition (the blue potentiometer to adjust the input voltage)
Modules with power indicator (for the module power supply indicator lights)
Modules with DA output indicator, when the module DA output interface voltage reaches a certain value, will be lit panel the DA output indicator, the higher the voltage, the more obvious indicator brightness;
Module PCB size: 3.6cm * 2.3cm
Standard double panel, thickness 1.6mm, nice layout, surrounded by a through-hole, aperture: 3mm, convenient fixed
Module interface specification
The module on the left and right, respectively, to expand outside the 2-way pin header, respectively, as follows:
The left
AOUT chip DA output interface
AINO chip analog input interface 0
AIN1 chip analog input interface 1
AIN2 chip analog input interface 2
AIN3 chip analog input interface 3
The right
SCL – IIC clock interface connected to microcontroller IO port
SDA – IIC digital interface connected to microcontroller IO port
GND – connected to ground
VCC – connected to 3.3v-5v
Four red jumper-cap instruction
P4 – connected to P4 shorting cap, select thermistor access circuit
P5 – connect P5 shorting cap, select photoresistor access circuit
P6 – connected to P6 shorting cap, select 0-5V adjustable voltage access circuit
Package Content:
1 x PCF8591 Module
4 x 20cm cables
UK Seller, quick dispatch. 1ST CLASS POST.
Please see my other listings for Raspberry Pi and Arduino related products.
Product ID: EP015