Sensors Kit PIR DS18B20 Temperature Ultrasonic 16x2 LCD for Raspberry Pi Arduino
Starter Sensors Kit and LCD Screen Module for Raspberry Pi Arduino
16 x 2 LCD Module White Characters Blue Backlight 5V 1602 for Arduino Raspberry Pi
A commonly used 1602 LCD display module with standard 16 pin interface. The module is a low-power consumption character LCD Module with a built-in controller. The LCD module can be easily interfaced with a MCU.
This LCD display module can be widely used in various fields
Low power consumption, white characters, blue backlight
Power Input: 5V DC
Display Format: 16 Characters x 2 lines
Working Temperature: 0-50℃
Storage Temperature: -10-60℃
Display Type: STN
Module Size (L x W x H): Approx. 3.1 x 1.4 x 0.4 inch
Viewing Area: Approx. 2.5 x 0.55 inch
Ultrasonic Module HC-SR04 Distance Sensor For Raspberry Pi Arduino Robot NEW
The HC-SR04 ultrasonic sensor uses sonar to determine distance to an object - just like bats or dolphins do.
This module offers excellent range accuracy and stable readings in an easy-to-use package. It operation is not affected by sunlight or black material (although acoustically soft materials like cloth can be difficult to detect). Similar in performance to the SRF005 but with the low-price of a Sharp infrared sensor.
Perfect for collision avoidance on your next robotics or multirotor project!
Power: 5V DC
Quiescent Current : <2mA
Effectual Angle: <15°
Ranging Distance : 2cm – 500 cm/1" - 16ft
Resolution : 0.3 cm
LxWxH: 45 x 20 x 15mm
IR Infrared PIR Motion Sensor Detector Module Raspberry Pi Arduino
This sensor detects motion from up to 20 feet away. It is very similar to the motion sensor used in home security systems.
This is a sophisticated passive infrared sensor module that does the "heavy lifting" of detecting motion, filtering, etc, for you. The on-board BIS001 IC chip handles all of the signal processing and outputs a digital high signal when motion is detected. The digital output on this module is very easy to use with an Arduino or other microcontroller.
The module contains trim pots that allow you to adjust time out to avoid rapid retriggering of the output. There is also a jumper setting that enables the re-triggering mode. Two mounting holes allow for secure attachment to just about any surface.
Want to experiment further? You can remove the dome shaped fresnel lens to experiment with the underlying pyrolectric sensor.
This module makes a great occupancy sensor. This is a popular module and there are many tutorials online for both the Raspberry Pi and Arduino.
Color: White + Green
Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
Infrared sensor with control circuit board
The sensitivity and holding time can be adjusted
Working Voltage Range: DC 4.5V- 20V
Voltage Output: High/Low level signal:3.3V TTL output
Detection distance: 3--7M(can be adjusted)
Detection range: <140°
Delay time: 5-200S(can be adjusted, default 5s +-3%)
Blockade time: 2.5 S (default)
Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
Trigger Method: L unrepeatable trigger / H repeatable trigger
Material: Mixed Material
Dimensions: 3.3 x 2.5 x 2.4cm
Quality DS18B20 temperature measurement sensor module Raspberry Pi Arduino
Main chip:18B20 temperature sensor
Resolution adjusting range: 9-12 bytes
Comes with installing hole,easy to install, hole diamere 2.5mm
Temperature Range: -55~+125C
Temperature measurement precision: 0.5C
Working voltage: DC 5V 6 digital signal output
Size: 28mm (length)x 12mm (width) x 10mm(height)
1 x 16 x 2 LCD Module White Characters Blue Backlight
1 x Ultrasonic Module HC-SR04 Distance Sensor
1 x PIR Infrared PIR Motion Sensor
1 x DS18B20 temperature measurement sensor module
UK Seller, quick dispatch. 1ST CLASS POST.
Please see my other listings for Raspberry pi and Arduino related products.
Raspberry Pi is a Trademark of the Raspberry Pi Foundation
Product ID: EP030