TEC1-12706 40x40mm Thermoelectric Cooler Peltier Plate Module 12V 60W
£4.75
TEC1-12706 40x40mm Thermoelectric Cooler Peltier Plate Module 12V 60W
Specification:
Keep it cool with a Peltier module. These unique electronic components can generate a temperature differential when powered. That is to say, apply 12V to the red (positive) and black (negative) wires and one side will get cold while the other side gets hot. For best results, you'll need to wick away that heat (otherwise the cold side will slowly get warmer). A fan and/or heatsink is ideal.
This module is a 12V module, and is rated for ~72W max (up to 14V/6A) but when used with a regulated 12V output they don't draw more than 5A so we suggest our 12V/5A power adapter for use.
Features:
Model: TEC1-12706
Max current: 6A @ 12V
Suggested Voltage range: 12V to 15.5V
Maximum temperature differential (Tmax @ Qc = 0): 66°C
Maximum cooling power (Qcmax) @ 15.3V: 97W
127 Peltier elements
DC Resistance: 2.5 ohms
Silicone seal
Dimensions: 40mm / 1.57" x 40mm / 1.57" x 3.5mm / 0.13"
Wire Length: 339.72mm / 13.32"
Weight: 20.68g
Installation
Cooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.
Package:
1 x TEC1-12706 Thermoelectric Cooler
UK Seller, quick dispatch.
Please see my other listings for Raspberry pi and Arduino related products.
Raspberry Pi is a Trademark of the Raspberry Pi Foundation.
Product ID: EP067
Specification:
Keep it cool with a Peltier module. These unique electronic components can generate a temperature differential when powered. That is to say, apply 12V to the red (positive) and black (negative) wires and one side will get cold while the other side gets hot. For best results, you'll need to wick away that heat (otherwise the cold side will slowly get warmer). A fan and/or heatsink is ideal.
This module is a 12V module, and is rated for ~72W max (up to 14V/6A) but when used with a regulated 12V output they don't draw more than 5A so we suggest our 12V/5A power adapter for use.
Features:
Model: TEC1-12706
Max current: 6A @ 12V
Suggested Voltage range: 12V to 15.5V
Maximum temperature differential (Tmax @ Qc = 0): 66°C
Maximum cooling power (Qcmax) @ 15.3V: 97W
127 Peltier elements
DC Resistance: 2.5 ohms
Silicone seal
Dimensions: 40mm / 1.57" x 40mm / 1.57" x 3.5mm / 0.13"
Wire Length: 339.72mm / 13.32"
Weight: 20.68g
Installation
Cooling piece is very simple to install and use. Before installation, to find a dry cell, connected to the two leads of the cooler, obviously cold you can feel at one end and the other end of fever, remember that the polarity of the lead and determine a good cooler cold and hot end. If you want to get a bigger system Ling, it is recommended that two cooling mode, with two stack up with the above, a grim absorption following a fever, the experiments prove two refrigeration effect is much better than the single-stage, the condition can choose three, of course, have a large power supply support.
Package:
1 x TEC1-12706 Thermoelectric Cooler
UK Seller, quick dispatch.
Please see my other listings for Raspberry pi and Arduino related products.
Raspberry Pi is a Trademark of the Raspberry Pi Foundation.
Product ID: EP067
|